Stanley SSC22, Оригинальное руководство пользователя, Страница: 10 / 46

EC declaration of conformity
MACHINERY DIRECTIVE
SSC22 - Chop Saw
STANLEY declares that these products described under
"technical data" are in compliance with : 2006/42/EC,
EN 62841-1:2015, EN 62841-3-10:2015
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact STANLEY
at the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY.
R.Laverick
Engineering Manager
STANLEY , Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
12.2016
TWO YEAR WARRANTY
If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date of
purchase, STANLEY guarantees to replace all defective parts
free of charge or – at our discretion – replace the unit free of
charge provided that:
• The product has not been misused and has been used in
accordance with the instruction manual;
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorized
persons;
• Proof of purchase is produced;
• The STANLEY product is returned complete with all original
components;
• The product hasn’t been used for hire purposes.
If you wish to make a claim, contact your seller or check the
location of your nearest authorised STANLEY repair agent in
the STANLEY catalogue or contact your local STANLEY office
at the address indicated in this manual. A list of authorised
STANLEY repair agents and full details of our after sales
service is available on the internet at: www.2helpU.com
ENGLISH
(Original instructions)
10
VIBRATION AND NOISE
The declared vibration and noise emission values stated in the
technical data and the declaration of conformity have been
measured in accordance with a standard test method provided
by EN 62841 and may be used for comparing one tool with
another. The declared vibration and noise emission value may
also be used in a preliminary assessment of exposure.
WARNING! The vibration and noise emission value
during actual use of the power tool can differ from
the declared value depending on the ways in which
the tool is used. The vibration and noise level may
increase above the level stated.
When assessing vibration and noise exposure to determine
safety measures required by 2002/44/EC to protect persons
regularly using power tools in employment, an estimation of
vibration and noise exposure should consider, the actual
conditions of use and the way the tool is used, including taking
account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle in
addition to the trigger time.