Stanley Avdel 73200, Инструкция по эксплуатации и обслуживанию

Страница: 20 / 96

BODY ASSEMBLY
•
Fit Head Vice Jaw* to Head
63
and use soft jaws to hold the Head Vice Jaw in the inverted orientation.
• Fit Body 65 on to Head 63 .
• Apply Loctite® 243* to thread of Handle Retaining Nut
34
and wind on to Handle
63
using Handle Retaining Nut
Wrench* to tighten.
• Apply Loctite® 243* to thread of Air Piston Rod 58 and wind Air Piston Connector 41 on to Air Piston Rod. Tighten using
4mm A/F Allen key in Air Piston Rod and 14mm A/F spanner on Air Piston Connector.
• Fit Quad Seal
9
and Force Reduction Seal
35
to Air Piston
33
.
• Insert Air Piston 33 into Body 65 until it fits on to Air Piston Connector 41 .
• Apply Loctite® 243* to thread of Air Piston Connector
41
. Tighten Nut
3
using 27mm A/F Spanner with 14mm A/F
spanner or 5mm A/F Allen key on Air Piston Connector to prevent rotation.
• Fit 'O' Ring 8 on to Base Plate 32 .
• Insert Base Plate
32
into Body
65
and install Retaining Ring
24
.
• Thoroughly clean Silencer 37 or renew if worn. Fit Silencer to Base Cap 31 and install Retaining Ring 25 .
• Place Gasket
36
on to Base Cap
31
and fit on to Body
65
.
• Screw Locknut 38 on to Base Plate 32 using Locknut Socket* to a minimum torque of 60Nm. If necessary, use a 10mm
A/F Allen key to prevent rotation of Base Plate. Outer face of Locknut 38 must be flush with or below the surface of the
Base Plate 32 threaded spigot.
OPERATING VALVE
•
Fit 2 'O' Rings 10 into Valve Body 42 and 2 'O' Rings 11 on to Valve Body.
• Insert Valve Body
42
into Body
65
.
• Fit 2 'O' Rings 11 on to Valve Spool 39 .
• Insert Valve Spool
39
into Body
65
.
• Fit 'O' Ring 7 to Valve Retainer 40 .
• Apply Loctite® 243* to thread of Valve Retainer
40
and use 6mm A/F Allen key to install Valve Retainer into Body
65
.
• Fit 2 'O' Rings 4 on to Swivel Bolt 44 .
• Fit Swivel
43
on to Swivel Bolt
44
.
• Apply PTFE Tape to thread of Swivel Bolt 44 and using 22mm A/F spanner or socket, wind Swivel Bolt into Body 65 .
• Fit Adaptor
48
, Adaptor Ring
50
, Retaining Nut
49
and Deflector
47
.
* Refers to items included in 73200 Service Kit. For complete list see page 17.
Item numbers in
bold
refer to the General Assembly drawing and parts list (pages 21 – 22).
20
ENGLISH ORIGINAL INSTRUC TION