Stanley Avdel 73200 Скачать руководство пользователя

Страница: 23 / 96

8. PRIMING

Priming is ALWAYS necessary after the tool has been dismantled and prior to operating. It may also be necessary to restore

the full stroke after considerable use, when the stroke may have been reduced and fasteners are not now being fully placed

by one operation of the trigger.

8.1 OIL DETAILS

The recommended oil for priming is Hyspin® VG32 available in 0.5 litre (part number 07992-00002) or one gallon containers

(part number 07992-00006). Please see safety data below.

8.2 HYSPIN® VG 32 OIL SAFETY DATA

First Aid

SKIN:

Wash thoroughly with soap and water as soon as possible. Casual contact requires no immediate attention. Short term

contact requires no immediate attention.

INGESTION:

Seek medical attention immediately. DO NOT induce vomiting.

EYES:

Irrigate immediately with water for several minutes. Although NOT a primary irritant, minor irritation may occur following

contact.

Fire

Flash point 232°C. Not classified as flammable.

Suitable extinguishing media: CO2, dry powder, foam or water fog. DO NOT use water jets.

Environment

WASTE DISPOSAL: Through authorised contractor to a licensed site. May be incinerated. Used product may be sent for

reclamation.

SPILLAGE: Prevent entry into drains, sewers and water courses. Soak up with absorbent material.

Handling

Wear eye protection, impervious gloves (e.g. of PVC) and a plastic apron. Use in well ventilated area.

Storage

No special precautions.

8.3 PRIMING KIT

The 73200 Service Kit includes all of the parts needed to prime the tool. However, if required, a Priming Kit can be supplied

separately.

PRIMING KIT : 73200-99991

PART NO.

DESCRIPTION

QTY

07900-01060

PRIMING SYRINGE

07900-01061

PULL STROKE SETTER

07900-01062

RETURN STROKE SETTER

07900-01063

PRIMING SYRINGE EXTENSION

07900-01066

STARTER NUT

To fit the Pull Stroke Setter and Return Stroke Setter, the following standard tools are needed (not supplied with Priming Kit).

• 27mm Spanner
• 10mm Allen key

Spanners and Allen keys are specified across flats unless otherwise stated.

ORIGINAL INSTRUC TION

ENGLISH

Содержание Avdel 73200

































































































Результаты поиска

Содержание Avdel 73200

Отзывы:

Похожие инструкции для Avdel 73200

Бренды по названию

Популярные бренды

Stanley Avdel 73200, Инструкция по эксплуатации и обслуживанию

Результаты поиска

Содержание Avdel 73200

Отзывы:

Похожие инструкции для Avdel 73200

Бренды по названию

Популярные бренды