Stanley ARGON F650, Инструкция по установке, обслуживанию и эксплуатации

Страница: 26 / 64

Installation & Operating Manual for Argon F650 & F900 – Balanced Flue Gas Stoves
26
Natural Gas & LPG Models
3.5 Flue Connection
3.5.1 General notes
This appliance may be installed with a vertical roof terminal (C31) or a Horizontal wall terminal (C11).
This appliance may only be used with 100/150 sized Balanced Flue (otherwise known as Concentric
Flue) parts as specified by Waterford Stanley Stoves. The Waterford Stanley Stoves specified flue parts
have been approved with the appliance. If the appliance is installed on non-Waterford Stanley Stoves
approved parts, Waterford Stanley Stoves cannot guarantee or accept any responsibility for the proper
and safe working of the appliance. This will also void all warranty cover
The flue system must be constructed from the appliance vertically upwards from the top of the stove or
horizontally out of the rear of the stove, with all joints being fully locked and sealed using the Waterford
Stanley Stoves specified parts.
This stove can be flued out of the rear of the stove or out of the top of the stove, the 2 x flue collars are
fitted to the top of the stove and the installer needs to fit them as per the following instructions if you
want to change them to rear flue exit, it is very important that the following instructions are adhered to
PLEASE NOTE - ONLY WATERFORD STANLEY APPROVED FLUE
CAN BE FITTED TO THIS STOVE
The Approved Waterford Stanley Flue Collars –
Manufactured in Steel
– these are supplied fitted to the top exit of the stove