Stanley ARGON F650, Инструкция по установке, обслуживанию и эксплуатации

Страница: 31 / 64

GB & IE version
31
Flue Systems
The ARGON range of balanced flue gas stoves are approved only for use with the Waterford
Stanley approved concentric flue system. The stove is designed specifically for use with the flue
supplied from Waterford Stanley. Waterford Stanley Argon F650 & F900 balanced flue gas stoves
are fitted with flue collars to fit the 100/150 pipe. Please do not attempt to fit other concentric flue
pipes to this flue collar as they will not be a perfect gas tight match. The centre of the concentric
flue system is for evacuation of flue gases while the surrounding annulus is for supply of
combustion air.
These kits can be purchased from Waterford Stanley Retailers. All flue components are manufactured in
stainless steel, stainless steel components are painted black for components that will likely be visible
Waterford Stanley Argon F650 & F900 balanced flue gas stoves are fitted with flue collars to fit the
100/150 Duo gas system. Please do not attempt to fit other concentric flue pipes to this flue collar as
they will not be a perfect gas tight match. This will void any warranty and would be deemed as an
unauthorised installation by Waterford Stanley and would not meet Building Regulations requirements.
Only a registered Gas Safe / Rgii engineer can install the Waterford Stanley stove and flue system
Please note there can be slight colour and shade variances between the stove and the flue
3.5.6 Horizontal Wall Vent Termination type C
11
Flue sizing: Ø100/150 Flue Connector on Appliance is only for Duo Gas
Maximum pipe extension, for outside wall (H) = 1 X Vertical Pipe Rise (V).
Maximum Permissible run (H) see table below.
Vertical Flue Rise
(V) metres
Max. Horizontal Flue Run, (H) m
for Ø100/150 flue
0.5 0.5
1 1
1.5 1.5
2 2
2.5 2.5
3 3
3.5 3.5
4 4
4.5 4.5
5 5
5.5 5.5
6.5 6.5
7 7
7.5 and over 7.5
Minimum Vertical Flue Height: 0.5m