Stanley ARGON F650, Инструкция по установке, обслуживанию и эксплуатации

Страница: 9 / 64

GB & IE version
9
2. User Instructions.
2.1 Emergency Gas Isolation
When installing this stove the Gas safe / rgii Installer
must fit a gas isolation valve ( not supplied) at
the rear of the stove with a pressure test point incorporated into the On/OFF Tap
- Please make
the customer aware of where this valve is fitted.
In the event of a gas leak or if gas is smelt, the appliance must be isolated. This is done by turning OFF
the gas at the Isolation Tap. This Isolation Tap should be fitted to the rear or side of the appliance.
2.2 First Time of Operation
Before igniting the appliance, ensure that all packaging, safety stickers and any protective wrapping
have been removed, and that the glass has been cleaned, including all fingerprints from the glass.
Ensure that the room is adequately ventilated the first time that the appliance is ignited; we would
recommend opening windows if possible.
Curing the Paint
Run the appliance at a 25% setting for a 1 hour
Then at a 50% Setting for 1 hour
Then Finally on Full Power 100% for 1 hour
This will then allow the paint the opportunity to fully cure. During this period it is possible for
some fumes and vapours to be given off.
We would recommend keeping children and pets out of the area at this time.
Special Notice for All LPG Models
For the Waterford Stanley these LPG stoves the inlet gas pressure must be
37.5 mbars if it’s less than this it can cause black spots forming on the
glass and black sooting on the logs and a low flame pattern this will be due
to low inlet gas pressure these conditions not covered by any warranty
whatsoever – see page 5 for full details