7
Standard Pump Operating Instructions and Parts Manual (OIPMS0611)
3. Remove the pump foot (P/N: 8826 or P/N: 8926) by turning
clockwise (see Figure 2) .
4. While holding the drive shaft (P/N: 8806 or P/N: 8807) with
pliers (Factory suggests grip-locks to avoid scarring shafts)
remove the impeller (P/N: 8827 or P/N: 8927) (see Figure 3).
5. Remove O-ring (P/N: 8830) from drive shaft (P/N: 8806 or 8807)
located behind impeller (P/N: 8827 or P/N: 8927 (see Figure 4).
6. Remove the Pump Housing (P/N: 8824) by turning clockwise
(see Figure 5) .
7. Remove the connection nut (P/N: 8842) (see Figure 6).
Figure 2
Pump Foot
Figure 6
Figure 5
Figure 3
NOTE:
Use grip-lock pliers to hold shaft while removing
impeller counter clockwise .
Figure 4
Drive Shaft
O-Ring