20
Standard Pump Operating Instructions and Parts Manual (OIPMS0611)
The pumps system is a positive displacement
pump system and should never be operated
against shut-off elements such as nozzles, valves, etc. Failure
to comply may result in excessive pressure build resulting in
serious injury and pump damage.
Running the pump dry will result in serious
damage to the mechanical seal and stator of
the pump.
Assembly
1. Remove the pump, motor, and meter from packaging.
2 . Inspect all contents for damages .
3. Couple the electric motor to the pump using the hex nut.
4. Attach the meter to the pump discharge using the supplied
tri-clamp fitting .
5. Attach the hose barb to the meter using the supplied tri-
clamp fitting .
6. Pump clean water in order to familiarize yourself with the
system operation .
7. It is recommended to thoroughly clean and sanitize the
system before use .
8 . Use closed top drum or cover to prevent possible
contamination .
Do not transfer of flammable or
combustible products or in an environment
where flammable or combustible fumes are present. Failure to
comply may result in serious injury or death.
Operation
1. Please refer to the Operation – SP-800SR Series portion of
these operating instructions on page 10 for the pump and
motor portion of this system.
2. For information regarding the calibration and operation of
the meter, please refer to the factory operating instructions
included in this package.
Maintenance
Please refer to page 12 of these operating instructions for
information on disassembly, cleaning, and maintenance of this
system .
Note:
Motor spare parts (see page 23) Pump spare parts (see page 21)
Maintenance (see page 12)
Flow Meter & Pump System
Notes
1. Performance will vary depending on whether the product being pumped is Newtonian
(viscosity remains constant regardless of shear) or non-Newtonian (viscosity does not remain
constant with shearing).
2. Flow rates based on water. As viscosity increases, the flow rate will decrease.
Specifications
Models 8320, 8321, 8320BL, 8321BL
Maximum Liquid Temperature
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250º F (121º C)
Pump Type . . . . . . . . . . . . . . . . . . . . . . . . . .Progressive Cavity (Positive Displacement)
Pump Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
900 RPM
Metering Principle . . . . . . . . . . . . . . . . . . . . . . . . . . .
Paddle Wheel Flow Technology
Max. Flow Rate
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 GPM (38 LPM)
Max. Discharge Pressure
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 psi (4,8 bar)
Immersion Length
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39
" (1000 mm)
Wetted Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SS 316, Teflon
Discharge Port
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 .5"
(38 mm) Hose Barb Tri-Clamp
(Optional 1 .25"
(32 mm) Hose Barb)
Max. Viscosity
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 cps (mPAS)
Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SP-ENC Series