28
Standard Pump Operating Instructions and Parts Manual (OIPMS0611)
Initially Issued: 7/27/2004 Authorization No.: 1338
This Is To Certify That
Standard Pump, Inc
1540 University Drive, Auburn, Georgia 30011
Is hereby authorized to continue to apply the 3-A Symbol to the models of equipment,
conforming to 3-A Sanitary Standards for:
Centrifugal and Positive Rotary Pumps, Number: 02-10, set forth below:
Model Designations: Progressive Cavity Drum Transfer Pumps - SP-800 Series
(See Attached)
Valid through: December 31, 2012
Timothy R. Rugh_______________________
Executive Director, 3-A Sanitary Standards, Inc.
*****
The issuance of this authorization for the use of the 3-A Symbol is based upon the volun-
tary certification, by the applicant for it, that the equipment listed above complies fully
with the 3-A Sanitary Standards designated. Legal responsibility for compliance is solely
that of the holder of this Certificate of Authorization, and 3-A Sanitary Standards, Inc.
does not warrant that the holder of an authorization at all times complies with the provi-
sions of the said 3-A Sanitary Standards. This in no way affects the responsibility of 3-A
Sanitary Standards, Inc. to take appropriate action is cases in which evidence of noncon-
formance has been established.
®