27
Standard Pump Operating Instructions and Parts Manual (OIPMS0611)
STANDARD PUMP
1540 University Drive, Auburn, Georgia 30011 USA
TOLL FREE 1-866-558-8611 • Phone 770–307–1003 • Fax 770–307–1009
e-mail: info@standardpump .com
www .standardpump .com
WARRANTY
Declaration of Conformity
When this unit is used as a stand alone unit it complies with:
Machinery Directive 98/37/EC EN60204,
EN60335-2-41, EN60335-1, Low Voltage Directive 73/23/Eec
EN61010-1, EMC Directive 89/336/Eec EN55014, EN 550104,
EN50081-1, EN50082-1
Declaration of Incorporation
When this pump unit is to be installed into machine
or is to be assembled with other machines for
installations, it must not be put into service until
the relevant machinery has been declared in
conformity with Machine Directive 98/37/EC
EN60204, EN60335-2-41, EN60335-1 .
Responsible person: Donald M. Murphy, President, Standard Pump, Inc.
1540 University Drive, Auburn, Georgia 30011
Ph: 001-770-307-1003 Fax: 001-770-307-1009
e-mail: info@standardpump .com
www .standardpump .com
Three year limited warranty
Standard Pump, Inc. warrants, subject to the conditions below, through either Standard Pump, Inc., it’s subsidiaries,
or its authorized distributors, to repair or replace free of charge, including labor, any part of this equipment which
fails within
three years
of delivery of the product to the end user. Such failure must have occurred because of defect
in material or workmanship and not as a result of operation of the equipment other than in accordance with the
instructions given in this material. Specific exceptions include:
• Consumable items such as motor brushes, bearings, couplings and impellers. (Motor brushes typically have a life
span of approximately 700 hours. This will vary with the manner in which the motor is used)
Conditions of exceptions include:
• Equipment must be returned by prepaid carriage to Standard Pump, Inc., its subsidiary or authorized distributor.
• All repairs, modifications must have been made by or with express written permission by Standard Pump, Inc.,
it’s subsidiary or authorized distributor.
• Equipment which have been abused, misused, or subject to malicious or accidental damage or electrical
surge are excluded.
Warranties purporting to be on behalf of Standard Pump, Inc. made by any person, including representatives of
Standard Pump, Inc, its subsidiaries, or its distributors, which do not fall within the terms of this warranty shall not
be binding upon Standard Pump, Inc. unless expressly approved in writing by a Director or Manager of Standard
Pump, Inc. Information for returning pumps Equipment which has been contaminated with, or exposed to, bodily
fluids, toxic chemicals or any other substance hazardous to health must be decontaminated before it is returned to
Standard Pump, Inc, or its distributor. A returned goods authorization number (RGA #) issued by Standard Pump, Inc.,
its subsidiary or authorized distributor, must be included with the returned equipment. The RGA # is required if the
equipment has been used. If the equipment has been used, the fluids that have been in contact with the pump and
the cleaning procedure must be specified along with a statement that the equipment has been decontaminated.
Declarations