Standard Horizon GX2000E, Руководство пользователя

Страница: 94 / 128

GX2000E/GX2100E Page 94
11.9 DEMO MODE
This mode is used by Standard Horizon sales persons and dealers to demon-
strate radio, DSC and AIS functions. Demo mode allows Latitude, longitude
and time to be entered to simulate radio displays. When DEMO mode is en-
abled, the radio display will automatically switch from NORMAL, COMPASS,
AIS and WAYPOINT displays.
NOTE
When demo mode is enabled and the radio is turned off and back on the
radio will still be in DEMO mode.
1. Press and hold down the [ CALL
(
MENU
)] key
until “
Setup Menu
” appears.
2. Rotate the CHANNEL knob to select “
DEMO
MODE
”.
3. Press the [ SELECT
] soft key, then select “
POS IN-
PUT ” with the CHANNEL knob.
4. Press the [ SELECT
] soft key.
5. Enter the latitude/longitude of your vessel and
your local UTC time in the 24-hour notation
by the
CHANNEL knob. Rotate the CHAN-
NEL knob to select the number and press the [ ENT
]
soft key to move the cursor to the next char-
acter. You may backspace the cursor by
pressing the [
BACK
] soft key, if you make a
mistake.
6. To store the data entered, press and hold the
[
ENT
] soft key.
7. Rotate the CHANNEL selector knob to “ DEMO
START
” and press the [ SELECT
] soft key.
8. Select “
START
” using the CHANNEL selector knob and press the [ ENT
]
soft key.
NOTE
To stop DEMO mode, perform steps above, in step 8 select “
STOP
”.