Standard Horizon GX2000E, Руководство пользователя

Страница: 74 / 128

GX2000E/GX2100E Page 74
9.10 MANUAL INPUTTING OF THE GPS LOCATION
(
LAT/LON
)
You may send the Latitude/Longitude of your vessel manually even if the
GX2000E/GX2100E is not connected the GPS receiver unit.
After the position is entered, transmitting a DSC Distress, Position Request, or
Position Report will contain the manually entered position.
1. Press and hold down the [ CALL
(
MENU
)] key
until “
Setup Menu
” appears.
2. Rotate the CHANNEL knob to select “
DSC
SETUP
” menu.
3. Press the [ SELECT
] soft key, then select “
PO-
SITION INPUT
” with the CHANNEL knob.
4. Press the [ SELECT
] soft key. The transceiver
will beep, and the display will be as shown in
the illustration on the right.
5. Enter the latitude/longitude of your vessel and your
local UTC time in the 24-hour notation by the CHAN-
NEL knob. Rotate the CHANNEL knob to select the
number and press the [ ENT
] soft key to move the
cursor to the next character. You may backspace
the cursor by pressing the [
BACK
] soft key, if you
make a mistake.
6. To store the data entered, press and hold the [ ENT
] soft key.
7. Press the [ QUIT
] soft key several times to return to radio operation.