Standard Horizon GX2000E, Руководство пользователя

Страница: 70 / 128

GX2000E/GX2100E Page 70
9.9 POSITION REPORT
The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to
another vessel. Your vessel must have an operating GPS receiver connected
for the
GX2000E/GX2100E to send the position.
NOTE
To transmit a Position Report Call, a GPS must be connected to the
radio and the
GX2000E/GX2100E Individual directory must be pro-
grammed with stations you wish to send your position to. To setup this
directory refer to section “
9.5.1 Setting up the Individual / Position
Call Directory .”
9.9.1 Setting up a Position Report Ringer
The GX2000E/GX2100E has the capability to turn off the Position Report ringer.
1. Press and hold down the [ CALL
(
MENU
)] key
until “
Setup Menu
” appears.
2. Rotate the CHANNEL knob to select “ DSC
SETUP
” menu.
3. Press the [ SELECT
] soft key, then select “
DSC
BEEP
” with the CHANNEL knob.
4. Press the [ SELECT
] soft key, then select “
POS
Report
” with the CHANNEL knob.
5. Press the [ ENT
] soft key, then select “
Off ” with
the CHANNEL knob.
6. Press the [ ENT
] soft key to store the selected set-
ting.
7. Press the [ QUIT
] soft key several times to return to
radio operation.
To re-enable the ringer tone, repeat the above procedure, rotating the CHAN-
NEL knob to select “
On
” in step “5” above.
9.9.2 Transmitting a DSC Position Report Call
Pre-Programmed Calling
1. Press the [ CALL
(
MENU
)] key. The “
DSC
Menu
” will appear.
2. Rotate the CHANNEL knob to select “ POS RE-
PORT
”. (To cancel, press the [ QUIT
] soft key.)
3. Press the [ SELECT
] soft key.
4. Rotate the CHANNEL knob to select the name in