Standard Horizon GX2000E, Руководство пользователя

Страница: 45 / 128

Page 45 GX2000E/GX2100E
9.2.2 Programming the MMSI
WARNING
A user MMSI can be inputted only once. Therefore please be careful
not to input the incorrect MMSI number. If you need to change the
MMSI number after it has been entered, the radio will have to be returned
to Factory Service. Refer to the section “
18.2 FACTORY SERVICE .”
1. Press and hold down the [ CALL
(
MENU
)] key
until the “
Setup Menu
” appears.
2. Rotate the CHANNEL knob to select “
MMSI
SETUP ”.
3. Press the [ SELECT
] soft key. (To cancel, press the
[
ENT
] soft key.)
4. Rotate the CHANNEL knob to select the first
number of your MMSI, then press the [ ENT
]
soft key to step to the next number.
5. Repeat step 4 to set your MMSI number (nine
digits).
6. If a mistake was made entering in the MMSI
number, press the [ BACK
] soft key until the
wrong number is selected, then rotate the
CHANNEL knob to correct the entry and press the
[
ENT
] soft key.
7. When finished programming the MMSI number, press
and hold the [ ENT
] soft key. The radio will ask you to
input the MMSI number again. Use steps 4 - 6 above.
8. After the second number has been input, press and
hold the CHANNEL knob to store the MMSI.
9. Press the [ OK
] soft key to return to radio operation.
NOTE
To view your MMSI after programming to ensure it is correct, perform
steps 1~3. Look that the MMSI number shown on the display is correct.