Standard Horizon GX2000E, Руководство пользователя

Страница: 63 / 128

Page 63 GX2000E/GX2100E
4. Press the [ SELECT
] soft key, then select “
ADD ” with
the CHANNEL knob.
5. Press the [ SELECT
] soft key.
6. Rotate the CHANNEL knob to scroll through the first
letter of the name of the group you want to refer-
ence in the directory.
7. Press the [ SELECT
] soft key to store the first letter
in the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to eleven characters, if
you do not use all eleven characters press the [
SE-
LECT
] soft key to move to the next space. This
method can also be used to enter a blank space in
the name. If a mistake was made entering in the
name repeat pressing the [
BACK
] soft key until the
wrong character is selected, then rotate the CHANNEL knob to correct the
entry.
9. After the eleventh letter or space has been entered, press and hold the
[
SELECT
] soft key to advance to the GROUP MMSI (Maritime Mobile Ser-
vice Identity Number) number entry.
10. Rotate the CHANNEL knob to select the second num-
ber of the MMSI (nine digits: first digit permanently
set to “0”) which you want to contact, then press the
[
SELECT
] soft key to step to the next number. Repeat this procedure until
all eight space of the MMSI number are entered.
11. If a mistake was made entering in the MMSI number repeat pressing the
[
BACK
] soft key until the wrong number is selected, then rotate the
CHAN-
NEL knob to correct the entry.
12. To store the data entered, press and hold the [ SELECT
] soft key.
13. To enter another group address, repeat steps 5 through 12.
14. Press the [
QUIT
] soft key several times to return to radio operation.
9.7.2 Transmitting a Group Call
Pre-Programmed Calling
1. Press the [ CALL
(
MENU
)] key. The “
DSC
Menu ” will appear.
2. Rotate the CHANNEL knob to select
“
GROUP
”. (To cancel, press the [ QUIT
] key.)
3. Press the [ SELECT
] soft key. The transceiver will
beep, and the “Last Group Call” will appear.
4. Rotate the CHANNEL knob to select the “Group” you want to contact.