Standard Horizon GX2000E, Руководство пользователя

Страница: 113 / 128

Page 113 GX2000E/GX2100E
15.2 ATIS CODE PROGRAMMING
1. Press and hold down the [ CALL
(
MENU
)] key
until “
Setup Menu
” appears.
2. Rotate the CHANNEL knob to select “
ATIS
SETUP ” menu.
3. Press the [ SELECT
] soft key, the select “
ATIS CODE
”
with the CHANNEL knob.
4. Press the [ SELECT
] soft key.
5. Rotate the CHANNEL knob to select the first
number of your ATIS, then press the [ ENT
]
soft key to step to the next number.
6. Repeat step 5 to set your ATIS (ten digits).
7. If a mistake was made entering, repeatedly
press the [ BACK
] soft key until the wrong
number is selected, then rotyate the CHAN-
NEL knob to correct entry.
8. When finished programming the ATIS number, press
and hold the [ ENT
] soft key. The radio will ask you
to input the ATIS number again. Use steps 5 - 7
above, then press and hold the [
ENT
] sont key.
9. Press the [ OK
] soft key to store the ATIS number in
memory.
10. Press the [ QUIT
] soft key several times to return to
radio operation.