Standard Horizon GX2000E, Руководство пользователя

Страница: 42 / 128

GX2000E/GX2100E Page 42
8.11 INTERCOM OPERATION
To access the following Intercom functions one of the soft keys must be setup
as IC. Refer to section “
10.12 SOFT KEYS ”.
In addition an optional RAM3 must be connected to perform intercom func-
tions between the radio and the RAM3 .
8.11.1 Communication
1. Press the one of the soft keys momentarily, then
press the [ IC
] soft key to enable the intercom mode.
Note : Depending on the programming of the [ IC
]
soft key, the [ NEXT
] soft key may have to be pressed
to see the [ IC
] soft key.
2. When the intercom mode is enabled, “
Intercom
” is displayed on the radio
and CMP30 ( RAM3
) Remote Station Microphone.
3. Press the PTT switch on the
radio. “
Talk
” will be shown on
the display.
Note : A warning beep will be
heard when the Radios PTT
and CMP30 ( RAM3
)
PTT are
pushed at the same time.
4. Speak slowly and clearly into
the microphone, hold the mi-
crophone about 1.5 cm away
from your mouth.
5. When finished, release the PTT switch.
6. Press the [ CLR
(
WX
)] key to exit intercom mode and revert to radio mode.
8.11.2 Calling
Press and holding the [ IC
] soft key when in intercom mode on either the radio
or CMP30 ( RAM3
) mic will produce a calling beep to the other station.
(
GX2000E/GX2100E ’s PTT switch is pressed)
GX2000E/GX2100E CMP30
(
CMP30 ’s PTT switch is pressed)
GX2000E/GX2100E CMP30