Standard Horizon Eclipse DSC+ GX1100E, Руководство пользователя

Страница: 35 / 68

Page 35 GX1100E
9.5.4 Transmitting an Individual Call
This feature allows the user to contact another vessel with a DSC radio. This
feature is similar to calling a vessel on CH16 and requesting to go to another
channel.
Pre-Programmable Calling
1. Press the [ CALL
(
MENU
)] key. The “
DSC MENU DSC MENU DSC MENU DSC MENU DSC MENU
”
will appear.
2. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to select
“
INDIVIDUAL INDIVIDUAL
INDIVIDUAL INDIVIDUAL INDIVIDUAL
”. (To cancel, press the [ 16/9
] or [
CLR
]
key.)
3. Press the [ ENT
] key. The transceiver will beep,
and the “Individual directory” will appear.
4. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to select
the “Individual” you want to contact.
5. Press the [ ENT
] key, then press the [
S
(
UP
)] /
[
T
(
DOWN
)] keys to select the operating channel
you want to communicate on and press the [ ENT
]
key.
6. Press the [ ENT
] key again to transmit the individual
DSC signal.
7. After INDIVIDUAL CALL is transmitted, if the reply
signal is not received, “
WAIT FOR ACK WAIT FOR ACK WAIT FOR ACK WAIT FOR ACK WAIT FOR ACK
” notation
will show on the display. To send the call again,
press the [
T
(
DOWN
)] key followed by the [
ENT
]
key.
8. When an individual call acknowledgment is re-
ceived, the established channel is automatically
changed to the channel which is selected on step
5 above and a ringing tone sounds.
9. Press the [ CLR
(
WX
)] key to listen to the channel
to make sure it is not busy, then key the micro-
phone and call the other vessel you desire to com-
municate with.