Standard Horizon Eclipse DSC+ GX1100E, Руководство пользователя

Страница: 42 / 68

GX1100E Page 42
Manual Calling
You may enter an MMSI number manually to contact without the Setting up the
Group call number.
1. Press the [ CALL
(
MENU
)] key. The “
DSC DSC
DSC DSC DSC
MENU MENU MENU MENU MENU
” will appear.
2. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to se-
lect “
GROUP GROUP GROUP GROUP GROUP
”. (To cancel, press the [ 16/9
]
key or [ CLR
(
WX
)] key.)
3. Press the [ ENT
] key. The transceiver will
beep, and the “
Group Directory Group Directory
Group Directory Group Directory Group Directory
” will appear.
4. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to
select “
MANUAL MANUAL
MANUAL MANUAL
MANUAL
”, then press the [ ENT
] key.
5. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to scroll
through numbers, 0-9. To enter the desired num-
ber and move one space to the right press the
[
ENT
] key. Repeat this procedure until all nine
space of the MMSI number which you want to con-
tact are entered.
6. If a mistake was made entering in the MMSI num-
ber, repeat pressing the microphone’s [ H/L
] key
until the wrong nunber is selected, then press the
[
S
(
UP
)] / [
T
(
DOWN
)] keys to correct the entry.
7. When finish the entering the MMSI number, press
and hold the [ ENT
] key.
8. Press the [ ENT
] key, then press the [
S
(
UP
)] /
[
T
(
DOWN
)] keys to select the operating channel
you want to communicate on and press the [ ENT
]
key.
9. Press the [ ENT
] key again to transmit the Group
Call signal.
10. After the GROUP CALL is transmitted, all the ra-
dios in the group will switch to the channel which
is selected on step 5 above (but, the display will
not change).
11. Press the [ CLR
(
WX
)] key to return to radio opera-
tion mod.
12. Listen to the channel to make sure it is not busy,
then key the microphone and call the other ves-
sels you desire to communicate with.