Standard Horizon Eclipse DSC+ GX1100E, Руководство пользователя

Страница: 41 / 68

Page 41 GX1100E
key. Repeat this procedure until all nine space of the MMSI number are
entered.
11. If a mistake was made entering in the name or the MMSI number repeat
pressing the microphone’s [ H/L
] key until the wrong character is selected,
then move the channel knob to correct the entry.
12. To store the data entered, press and hold the [ ENT
]
key.
13. To enter another individual address, repeat steps
4 through 12.
14. To exit this menu and return to radio operation mode press the [ 16/9
] key.
9.7.2 Transmitting a Group Call
Pre-Programmable Calling
1. Press the [ CALL
(
MENU
)] key. The “
DSC DSC DSC DSC DSC
MENU MENU MENU MENU MENU
” will appear.
2. Press the [
S
(
UP
)] / [
T
(
DOWN
)] keys to se-
lect “
GROUP GROUP
GROUP GROUP
GROUP
”. (To cancel, press the [ 16/9
]
key or [ CLR
] key.)
3. Press the [ ENT
] key. The transceiver will
beep, and the “
Group Directory Group Directory Group Directory Group Directory Group Directory
” will appear.
4. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to
select the “
Group Group Group Group Group
” you want to contact.
5. Press the [ ENT
] key, then press the [
S
(
UP
)]
/ [
T
(
DOWN
)] keys to select the operating
channel you want to communicate on and
press the [
ENT
] key.
6. Press the [ ENT
] key again to transmit the
Group Call signal.
7. After the GROUP CALL is transmitted, all
the radios in the group will switch to the
channel which is selected on step 5 above
(but, the display will not change).
8. Press the [ CLR
(
WX
)] key to return to radio opera-
tion mode.
9. Listen to the channel to make sure it is not busy,
then key the microphone and call the other ves-
sels you desire to communicate with.