Standard Horizon Eclipse DSC+ GX1100E, Руководство пользователя

Страница: 52 / 68

GX1100E Page 52
9.11 MANUAL INPUTTING OF THE GPS LOCATION
(
LAT/LON
)
You may send the Latitude/Longitude of your vessel manually even if the
GX1100E is not connected the GPS receiver unit.
After the position is entered, transmitting a DSC Distress, Position Request, or
Position Send will contain the manually entered position.
1. Press and hold down the [ CALL
(
MENU
)]
key until “
SETUP MENU SETUP MENU
SETUP MENU SETUP MENU
SETUP MENU
” appears.
2. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to se-
lect “
POS INPUT POS INPUT
POS INPUT POS INPUT POS INPUT
” menu.
3. Press the [ ENT
] key. The transceiver will beep,
and the display will be as shown in the illustration
on the right.
4. Enter your local time by the 24-hour system
on the UTC time. Use the [ ENT
] and the
microphone’s [ H/L
] key to navigate to each
column of the time, then use the [ S
(
UP
)] /
[
T
(
DOWN
)] keys to select the desired num-
bers in each colum. Repeat for each col-
umn, to complete the time.
5. Enter the Latitude/Longitude of your vessel
location with the same procedure as de-
scription above.
6. To store the data entered, press the [ ENT
] key. To
exit this menu and return to radio mode press the
[
16/9
] key.