Standard Horizon Eclipse DSC+ GX1100E, Руководство пользователя

Страница: 21 / 68

Page 21 GX1100E
8.8 MAKING TELEPHONE CALLS
To make a radiotelephone call, use a channel designated for this purpose, The
fastest way to learn which channels are used for radiotelephone traffic is to ask
at a local marina. Channels available for such traffic are designated
Public
Correspondence channels on the channel charts in this manual. Some ex-
amples for USA use are Channels 24, 25, 26, 27, 28, 84, 85, 86, and 87. Call
the marine operator and identify yourself by your vessel’s name, The marine
operator will then ask you how you will pay for the call (telephone credit card,
collect, etc.) and then link your radio transmission to the telephone lines.
The marine telephone company managing the VHF channel you are using may
charge a link-up fee in addition to the cost of the call.
8.9 OPERATING ON CHANNELS 13 AND 67
Channel 13 is used at docks and bridges and by vessels manoeuvering in port.
Messages on this channel must concern navigation only, such as meeting and
passing in restricted waters.
Channel 67 is used for navigational traffic between vessels.
By regulation, power is normally limited to 1 Watt on these channels. Your radio
is programmed to automatically reduce power to this limit on these channels.
However, in certain situations it may be necessary to temporarily use a higher
power. See page 17 ([
H/L
] key) for means to temporarily override the low-power
limit on these two channels.
8.10 SCANNING
Allows the user to select the scan type from Memory scan or Priority scan.
“Memory scan” scans the channels that were programmed into memory. “Prior-
ity scan” scans the channels programmed in memory with the priority channel.
8.10.1 Selecting the Scan Type
1. Press and hold down the [ CALL
(
MENU
)] key until
“
SETUP MENU SETUP MENU
SETUP MENU SETUP MENU
SETUP MENU
” appears.
2. Press the [ ENT
] key, then select “
SCAN SCAN SCAN SCAN SCAN
TYPE TYPE
TYPE TYPE
TYPE
” in the “
RADIO SETUP RADIO SETUP
RADIO SETUP RADIO SETUP
RADIO SETUP
” menu with the
[
S
(
UP
)] / [
T
(
DOWN
)] keys.
3. Press the [ ENT
] key.
4. Press the [
S
(
UP
)] / [
T
(
DOWN
)] keys to se-
lect “
PRIORITY SCAN PRIORITY SCAN
PRIORITY SCAN PRIORITY SCAN
PRIORITY SCAN
” or “
MEMORY SCAN MEMORY SCAN
MEMORY SCAN MEMORY SCAN
MEMORY SCAN
.”
5. Press the [ ENT
] key to store the selected setting.
6. To exit this menu and return to radio operation
mode press the [ 16/9
] key.