Standard Horizon Eclipse DSC+ GX1100E, Руководство пользователя

Страница: 47 / 68

Page 47 GX1100E
alarm sound and the position from the polled
vessel transferred to the GPS Chart plotter.
10. Press any key to stop the alarm.
11. Press the [
T
(
DOWN
)] key to show the po-
sition from the polled vessel transferred on the dis-
play.
12. If the GX1100E does not receive a reply, the dis-
play will be as shown in the illustration on the right.
To send again, press the [
ENT
] key.
9.8.3 Receiving a Position Request
When a position request call is received from another vessel, a ringing alarm
will sound and POS REQUEST will be shown in the LCD. Operation and trans-
ceiver function differs depending on “
POS REPLY POS REPLY POS REPLY POS REPLY POS REPLY
” in the “
DSC SETUP DSC SETUP DSC SETUP DSC SETUP DSC SETUP
” menu
setting.
Automatically reply:
1. When a position request call is received, a calling
alarm sounds 5 times. Then requested position co-
ordinates are transmitted automatically to the ves-
sel requesting your vessels position.
2. To exit from position request display, press the [ CLR
] key.
Manually reply:
1. When a position request call is received from an-
other vessel, the GX1100E will produce a ringing
alarm sound and the LCD will be as shown in the
illustration at the right.
2. Press any key to stop the alarm.
3. Press the [
ENT
] key to send your position to the requesting vessel, or press
the [ CLR
(
WX
)] key.
4. To exit from position request display, press the [ 16/9
] key.