20
EV Menu
The EV Menu is used to adjust the Exposure of the
Camera. Use the
arrows to change the bar from
DARKEST (left) to LIGHTEST (right). Press the
OK
Button to accept the change.
Power Saving Menu
The Power Saving Menu is used to turn off the screen
at a predetermined time, to save battery. This function
can be set to 1 minute, 2 minutes, 5 minutes, 10 minutes,
or disabled by selecting Cancel.
The monitor will go to black screen to save battery after
the time you have set (1 minute, 2 minutes, 5 minutes
or 10 minutes.
It will be activated by pushing any button on the front
panel of monitor or by higher sound detected by cameras.
If it is activated by pushing any button (except OK)
on front panel of monitor, the monitor will go back to
black screen after the time you set if there is no sound trigger during that time.
If it is activated by higher sound (sound trigger, it will go back to black screen about 8 seconds
after the last trigger.
Setting Menu
The Setting Menu contains 2 submenus:
A/V Out
Changes the quality of the image sent to the
A/V receiving device (i.e. TV or Monitor).
Default
Resets all menu settings to Factory Default.
NOTE:
Resetting the receiver will not reset all Camera
Pairing.
A/V Out Menu
The A/V Out menu option is used to adjust the Resolution Quality of the image sent to the Viewing
Device (such as a TV, VCR or Monitor). Use the UP and DOWN
arrows to select a Resolution,
and press
OK
to accept.
It is strongly recommended to use the High setting to ensure the best image reproduction on
large screens the default setting is High.
Setting Menu
The Setting option is used to reset the Receiver to Factory Defaults all menu settings will be
reset. Use the UP and DOWN
arrows to select YES, and press
OK
to accept.
NOTE:
Camera pairing settings will NOT be affected by a reset. Cameras will remain paired with
the Receiver.
