15
10.
Pair Button
Press the Pair button when Pairing the Receiver with a Camera.
11.
Night Light Button
Press to remotely turn Night Light ON or OFF (for the camera currently
being displayed on the LCD Screen).
12.
A Alarm +/-Button
Press to increase or decrease the volume of the audio alarm.
13.
Power Button
Press to turn the Receiver ON or OFF.
14.
A/V Out Port (Optional Use)
Connect the included A/V Cable to view video from the receiver
on a TV or Monitor, or record to a DVD Recorder or VCR. Alternatively, use the A/V Out port
on the Receiver Cradle.
NOTE
:
Using this feature will turn off the LCD screen. The LCD screen will turn back on
when the A/V Cable is disconnected.
15.
DC 9V Power Input
Connect the included DC 9V Power Adaptor to power the receiver and/or
charge the Receiver battery (when the receiver is not in the Cradle).
Camera unit - controls
1.
Camera Antenna
Receives & Sends signals to or from the Receiver
2.
Lens / IR LED Cover
Infrared LEDs provide viewing in no/low light conditions.
8.
Camera ON/OFF Switch
Turns the Camera ON or OFF.
4.
Microphone
Receives sounds for the area near the camera, and transmits sound from the
Camera to the Receiver.
5.
Night Light Switch
Press to turn the Light ON or OFF. Alternatively, press the Light button
on the Receiver to remotely turn the Camera Light ON or OFF.
6.
Sound Alarm Trigger
Adjust the Trigger to set the Sound Alarm sensitivity. The Receiver
will beep to alert the user when the sound is above a preset sound level. Adjust the side wheel
to Increase or Decrease the level.
7.
DC 9V Power
Connect the DC 9V Power Adaptor to the Camera.
NOTE:
The Camera can also be powered using 4 AA Batteries (not included) installed in the
base. If the Camera is plugged in with the AC Adaptor, the batteries will not be used. The
batteries are intended for short term, portable Camera use.
8.
PAIR Button
The pairing button is located on the back of the camera behind the stand mount.
* Additional cameras available as optional accessory.
1
2
3
4
5
6
7
8
