Hardware layout and configuration
UM1668
22/70
DocID025151 Rev 2
All resistors to be removed on the underside of the board are marked in red, while resistors
to be soldered are marked in green in
Figure 5
.
Figure 6
shows all resistors to be removed on the topside of the board marked in red, while
resistors to be soldered are marked in green (removal of R102 and R104, and mounting of
R16).
Figure 5. PCB underside rework for motor control
Figure 6. PCB topside rework for motor control
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from