ST ST7 Series Скачать руководство пользователя страница 93

Страница: 93 / 317

93/317

5 - Peripherals

bled during the service of an interrupt. In this case, all interrupts are validated and the service

routine may be itself interrupted by a request having a lower priority than its own. If the service

routine must be interruptible only by certain requests and not others, the routine must first

clear the interrupt enable flags of all peripherals that are not allowed at that time, then clear the

global interrupt mask. It is wise to save the value of these flags before clearing them, if several

interrupts may interrupt each other and each selects a different set of allowed interrupt re-

quests.

05-nest

This core is perfectly well able to handle nested interrupt servicing, with a limited nesting

depth. However, care must be taken about two things:

The size of the stack. Each interrupt pushes five bytes on the stack, plus the interrupt service

routine may push some bytes to protect any data in memory that may be used globally.

The problem of atomicity as explained in Chapter 2. If an interruptible service routine handles

multi-byte data, it must take into account the possibility of being interrupted in the middle of a

data read or write with the risk of data incoherence.

The applications described in Chapters 9 and 10 illustrate several uses of interrupts, in con-

junction with various peripherals.

Main :bit I=0

A maskable

interrupt occurs

interrupt # j

interrupt # k

Main :bit I=0

Here, the programmer

resets the I bit **

The I bit is set by hardware

Another maskable interrupt (nested interrupt) is

serviced, within the current one, whatever its priority

Without the intervention

of the programmer, bit I =0;

the interrupt # j can again

be interrupted

Nested interrupts

** Note: before resetting the I bit, you should clear the pending bit that started the current

interrupt, otherwise an endless recursive interrupt service call will be performed !

Содержание ST7 Series






























































































































































































































































































































Результаты поиска

Содержание ST7 Series

Отзывы:

ST ST7 Series, Руководство пользователя, Страница: 93 / 317

Результаты поиска

Содержание ST7 Series

Отзывы: