ST 500 "Piranha" Operation Manual: Software
56
Fig.50
In fig.50:
1 - list of frequency bands of mobile devices: sequence number, initial (lower) and ending
(upper) frequencies, range designation. The line of the adjustable range is highlighted in
blue
2 - activity checkbox. If not ticked: no search for signals in this range
3 - control of data exchange with ST 500 (reads and writes data relating only to the "Mobile
bands" mode)
4 - input field for initial (lower) frequency
5 - input field for ending (upper) frequency
6 - input field for range designation (only numbers and Latin letters can be used)
7 - band deletion
8 - accepting or canceling changes made
9 - download factory settings (list of mobile communication device ranges used in Russia)
USING THE MODE "MOBILE BANDS"
1. Go to tab "Mobile bands". The PC screen will look as shown in fig.50
2. Download data in any of the following ways:
from the PC, by clicking "Load from File" and selecting the file; all the data including range
customizations will be loaded
from ST 500, by clicking "Read ALL from ST500"; all the data including range
customizations will be loaded
from ST 500, by clicking "Read from ST500"; only band customizations will be loaded
from ST 500, by pressing "Restoring default Mobile Bands"; manufacturer-defined presets
will be loaded, with mobile communication bands specific to Russia
