ST 500 "Piranha" Operation Manual: Low Frequency Amplifier Channel
49
Fig.46
In fig.46:
1 - active channel
2 - data representation form
3 - connected pair of wires
4 - set division value of the time axis (mcs or ms)
5 - measured value of signal magnitude
6 - vertical zoom
7 - oscillogram
Upon activation of the OSCILLOSCOPE, the gain value and bias voltage, set in the
"ELECTRONIC SWITCH CONTROL" mode, are retained. Both these parameters can be adjusted
without exiting the OSCILLOSCOPE. The adjustment procedure is described in 7.3.1.
and 7.3.2.
Controls:
Key
Action
vertical zoom of the OSCILLOSCOPE
horizontal zoom of the OSCILLOSCOPE
F1, ESC
switching to "ELECTRONIC SWITCH CONTROL" mode
F2
activating/deactivating Gain Setting
F3
activating/deactivating Bias Voltage Setting
F4
activating "SPECTRUM ANALYZER" function
MODE
switching to the main menu of device
FUNC, ENTER
disabled
7.7. SPECTRUM ANALYZER
The SPECTRUM ANALYZER is activated from the OSCILLOSCOPE by pressing "F4" ("Spectr").
The screen will look as shown in fig.47.
