51
ELECTRICAL CONNECTION INSTRUCTIONS
7.3
Voltage Supply Connection
To connect the electrical supply:-
1. Ensure the supply cable and fuse ratings are suitable for the appliance (see Electrical Loads).
2. Remove the cover plate by undoing the screw.
3. Fit a suitable entry bush to the conduit entry bracket and feed the fixed wiring through.
4. Connect the wiring to the terminal block using the screw connections provided. Ensure the wires are properly
secured to prevent any high resistance electrical connection.
5. Replace the cover plate using the screw making certain that all wiring is clear of any metal work and the
screws.
When connected to a subcircuit protected by a circuit breaker, the current drawn by an oven may cause the
circuit breaker to trip in some cases. It is recommended that the following installation procedures are used.
Model
kW Rating
Maximum Current
Recommendation
(Amperes)
Cable Size
Circuit Breaker
UEO
3.9
16.3
2.5mm
2
20Amp
DEO
6.63
27.6
4.0mm
2
30Amp
UES
4.3
18.0
2.5mm
2
20Amp