46
Installation Addendum – Wall Ovens
When wall ovens are installed in situations in conjunction with vacuum formed vinyl/plastic materials, formed
onto a base material, it is essential to avoid direct radiation onto these surfaces and edges of doors and panels
adjacent to the sides and top of the wall oven.
It is recommended that a heat barrier be fitted to avoid this radiated heat.
See also page 3 of the St. George Specifications and Ratings Literature, this also covers this requirement.
Following are two methods of protecting the doors or panels to the side of the oven, and one to protect the
cabinets above the oven.
No responsibility can be accepted for any claims regarding the surrounding doors and panels, if the installation is
not to St. George Appliances and the manufacturer of the doors and panels, recommended method of Installation.
CABINET INSTALLATION INSTRUCTIONS