DE
EN
33
6.9 MONITOR
•
First person: Hold the monitor ('15') securely with both hands. Take a safe position next to the device.
•
Hold the intended position on the back of the monitor against the mounting plate of the monitor
holding tube ('8').
•
Second person: Make sure that the electrical connector on the back of the monitor is pointing through
the large hole in the mounting plate.
•
Turn the mounting screws ('135') through the holes in the mounting plate into the threaded holes on
the back of the monitor.
•
Tighten the screws by hand using an Allen key.
•
Connect the connector of the cable ('127') to the connector on the monitor. Snap the ring on the
connector with spring force.
6.10 FINAL STEPS
•
Check again the strength of all connections. Repeat these checks before each use.
•
Clean the device thoroughly before first use, as there may be oil residues and dust on it due to
production and packaging
15
127
135
14
#121 2X
#135 6X
#123 1X
M6 x 8l
