Spirit P8Q67-M-DO Скачать руководство пользователя страница 94

Страница: 94 / 176

Spirit P8Q67-M-DO (Eng) Rev 1



Articles of clothing generate static electricity. Do not allow clothing to come in direct

contact with the hard drive or circuit board components.



Handle the hard drive by the sides only. Avoid touching the circuit board

components.



Do not drop or knock the hard drive.



Do not stack hard drives or stand your hard drive on its edge.

Hard Drive Removal



It is not necessary to run setup after replacing the hard drive.

The system will auto detect the changed configuration.

Mid Tower



Remove the computer case cover.

1. Unlatch the cover and open the case from the back

2. Slide the side cover back

3. Press the tabs as illustrated below and pull back the Front

Bezel.

4. That opens the front case

Содержание P8Q67-M-DO

















































































































































































Результаты поиска

Содержание P8Q67-M-DO

Отзывы:

Spirit P8Q67-M-DO, Руководство пользователя, Страница: 94 / 176

Результаты поиска

Содержание P8Q67-M-DO

Отзывы: