Spirit P8Q67-M-DO, Руководство пользователя, Страница: 51 / 176

System Components
39
Intel® Q67 Serial ATA 6.0Gb/s Connectors
7-pin SATA6G_1/2 [gray]
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s
signal cables.

These connectors are set to [IDE Mode] by default. In IDE mode, you can
connect Serial ATA boot /data hard disk drives to these connectors. If you
intend to create a Serial ATA RAID set using these connectors, set the SATA
Mode item in the BIOS to [RAID Mode]. See SATA Configuration for details.

You must install Windows® XP Service Pack 3 or later version before using
Serial ATA hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and
10) is available only if you are using Windows® XP SP3 or later version.

When using hot-plug and NCQ, set the SATA Mode item in the BIOS to [AHCI
Mode]. See SATA Configuration for details.
Intel® Q67 Serial ATA 3.0Gb/s connectors
7-pin SATA3G_1~4 [blue]
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can
create a RAID 0, 1, 5, and 0+1(10) configurations with the Intel® Matrix Storage
Technology through the onboard Intel® Q67 chipset.