Spirit P8Q67-M-DO, Руководство пользователя, Страница: 142 / 176

Spirit P8Q67-M-DO (Eng) Rev 1
130
4. I have connected 3 hard drives to my new system. I would like to change the boot
priority of my hard drives, but I can only see one hard drive the boot priority menu.
How do I change the boot priority?
Under the EZ Mode UEFI BIOS will only show one device of each type. To change the
priority, go into Advanced Mode, look for [Hard Driver BBS Properties] under [Boot]
page, and change the boot priority from there.
3.

Note: You may need to scroll down to the bottom of the [Boot] page
to find [Hard Driver BBS Properties] item
4.
5. The AI Suite/PC Probe is not working properly. What do I do?
1. Load the default settings in BIOS (In case there are any overclocking in BIOS,
and use the utility to adjust)
2. If the utility is still not able to be used, uninstall the version you are using and
try to download the latest version from this link:
http://dlsvr04.asus.com/pub/ASUS/misc/utils/AISuite_V10325.zip
6. There is a yellow exclamation mark next to “ PCI Simple Communication Controller”
in Device Manager. How do I resolve this issue?
If the Intel® Management Engine (Intel ME) driver has not been successfully
installed, you may see this error. Download the appropriate driver from the link:
http://support.asus.com/download.aspx?SLanguage=en&p=1&s=32&m=P7Q57-
M+DO&os=&hashedid=XSm0g8qR5qb7UN30
7. The disk drive numbers may not correspond as expected to the SATA channel
numbers when you set up Windows Vista, Windows Server 2008, Windows Server
2008 R2, or Windows 7 on a computer that has multiple SATA or RAID disks.
The disk-assignment numbers may not necessarily match the corresponding SATA or
RAID channel numbers. There is no assurance of a consistent relationship between
PnP enumeration and the order of the hard disks that are detected during setup.
Devices are presented in the order in which they are enumerated. Therefore, the
disk-assignment numbers may change between startups. For example, assume that
you run Windows Vista, Windows Server 2008, Windows Server 2008 R2, or
Windows 7 Setup on a computer that has two unformatted SATA or RAID hard disks.
In this situation, Windows may present the second hard disk as Disk 0 when you are
prompted for the disk on which to install Windows Vista, Windows Server 2008,
Windows Server 2008 R2, or Windows 7.
When you set up Windows Vista, Windows Server 2008, Windows Server 2008 R2, or
Windows 7 on a computer that has multiple SATA or RAID hard disks, verify the disk
drive on which you will set up Windows Vista, Windows Server 2008, Windows
Server 2008 R2, or Windows 7 by checking the disk information. For example, on the
screen that lets you select the drive for the setup destination, verify the volume
name and the available space.