Spirit P8Q67-M-DO, Руководство пользователя, Страница: 104 / 176

Spirit P8Q67-M-DO (Eng) Rev 1
92

Gently grasp the adapter by its edges and ease it out of the slot.
Final Power Connection Procedures
1. After all connections are made, close the system case cover.
2. Make sure that all switches are in the off position.
3. Connect the power supply cord into the power supply located on the back of your
system case.
4. Connect the power cord onto a power outlet that is equipped with a surge protector .
5. You may then turn on your devices in the following order:

Monitor

External devices

System power
6. The power LED on the front panel of the system case will light, as will the monitor
LED. The system will then run power-on tests. While the tests are running, additional
messages will appear on the screen. If you do not see anything within 30 seconds
from the time you turn on the power, the system may have failed a power-on test.
Recheck your settings and connections or call your authorized dealer for assistance.
7. During power-on, hold down the<DEL> key to enter BIOS setup. (see BIOS Setup
Program “BIOS SOFTWARE ” for instructions)