Spirit P8Q67-M-DO, Руководство пользователя, Страница: 27 / 176

System Components
15

Unplug the power cord from the wall socket before touching any component.

Before handling components, use a grounded wrist strap or touch a safely
grounded object or a metal object, such as the power supply case, to avoid
damaging them due to static electricity.

Hold components by the edges to avoid touching the ICs on them.

Whenever you uninstall any component, place it on a grounded antistatic pad
or in the bag that came with the component.

Before you install or remove any component, ensure that the ATX power
supply is switched off or the power cord is detached from the power supply.
Failure to do so may cause severe damage to the motherboard, peripherals,
or components.
Onboard LED
The motherboard comes with a standby power LED that lights up to indicate that the system
is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the
system and unplug the power cable before removing or plugging in any motherboard
component. The illustration below shows the location of the onboard LED.
Motherboard Layout

Ensure that you install the motherboard into the chassis in the correct
orientation. The edge with external ports goes to the rear part of the chassis.