STEP 2: Handlebar Assembling
1. Put one of
ψ
17 Wave Washer (103) and then Handlebars (L) and (R), (10) and (11), at
each side of Console Mast shaft and secure with 2pcs of 5/16”x15mm Hex Head Bolts
(123) and 2pcs of 5/16”x23x1.5T Flat Washers (99) by using 14mm Wrench (129).
Connect Upper Resistance Handle Wire (146) and Upper Incline Handle Wire (146-1)
with Lower Resistance Handle Wire (147) and Lower Incline Handle wire (147-1), push
the excessive wires into the Console Mast (12) and Plug in the Wire Cap (145) at each
side on the Mast (12).
2. Match the Left Front Handlebar Cover (68) with Left Rear Handlebar Cover (68-1) on
Left Handlebar (10) and secure with 3pcs of
ψ
3.5x12mm Self Tapping Screws (107) by
using Phillips Head Screw Driver (126). Repeat for Right Handlebar (11).
69
69-1
107
68
107
68-1
103
99
10
123
123
103
11
99
12
147
145
147
145
146
146
CUSTOMER SERVICE 1-888-707-1180
8
MAURICE PINCOFFS CANADA©2007