manualshive.com logo in svg

Spirit 16117400, Руководство пользователя, Страница: 3 / 37

Поделиться
Скачать
Spirit 16117400 Скачать руководство пользователя страница 3

SAFETY PRECAUTIONS 

 
Thank you for purchasing our product. Even though we go to great efforts to ensure the quality of 
each product we produce, occasional errors and /or omissions do occur. In any event should you find 
this product to have either a defective or a missing part please contact the manufacturer at 1-888-
707-1880 for a replacement.  
 
This product has been designed for home use only. Product liability and guarantee conditions will 
not be applicable to products being subjected to professional use or products being used in a gym 
center.  
 
This exercise equipment was designed and built for optimum safety. However, certain precautions 
apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before 
assembly and operation of this machine. Also, please note the following safety precautions: 
1.  Read the OWNER’S OPERATING MANUAL and all accompanying literature and  

follow it carefully before using your elliptical. 

2.  If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced  

while using this equipment, STOP the workout at once.  CONSULT A PHYSICIAN 
IMMEDIATELY. 

3.    Inspect your exercise equipment prior to exercising to ensure that all nuts and bolts 

are fully tightened before each use. 

4.  The elliptical must be regularly checked for signs of wear and damage. Any part found  

defective must be replaced with a new part from the manufacturer. 

5.   Fitness equipment must always be installed on a flat surface, do not place the unit on a loose rug 

or uneven surface. It is recommended to use an equipment mat to prevent the unit from moving 
while it is being used, which could possibly scratch or damage the surface of your floor. 

6.  No changes must be made which might compromise the safety of the equipment. 
7.  It is recommended to have a minimum of 2’ safe clearance around the exercise equipment while 

in use. 

8.  Keep children and pets away from this equipment at all times while exercising. 
9.  Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes  afterward. This 

allows your heart rate to gradually increase and decrease and will help prevent you from 
straining muscles. 

10. Never hold your breath while exercising. Breathing should remain at a normal rate in conjunction 

with the level of exercise being performed  

11. Always wear suitable clothing and footwear while exercising. Do not wear loose  

fitting clothing that could become entangled with the moving parts of your elliptical. 

12. Care must be taken when lifting or moving the equipment, so as not to injure your back.  Always use    

proper lifting techniques. 

13. User weight should not exceed 350 lbs. 
 

WARNING: 

BEFORE BEGINNING ANY EXERCISE PROGRAM CONSULT YOUR PHYSICIAN. THIS 

IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS 

WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE 

USING ANY FITNESS EQUIPMENT. WE ASSUME NO RESPONSIBILITY FOR 

PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINS BY OR THROUGH THE USE 

OF THIS PRODUCT.

  

 

 

CUSTOMER SERVICE 1-888-707-1180 

 

2 

        MAURICE PINCOFFS CANADA©2007 

Содержание 16117400






































Отзывы:

Нет отзывов