manualshive.com logo in svg

Spirit 16117400, Руководство пользователя, Страница: 15 / 37

Поделиться
Скачать
Spirit 16117400 Скачать руководство пользователя страница 15

 
 

COMPUTER OPERATION INSTRUCTIONS 

 
 

Fan 

 

Data display 

Dot matrix

Message window
 

Program Buttons 

 
 

 

Power up 

The Elliptical is supplied with an external power supply. When power is connected to the Elliptical, the 
console will automatically power up. If there is no input to the console for 20 minutes the console will go to 
stand-by mode. In stand-by mode the console display will turn off. To turn the console on press any key.  
 
When initially powered on the console will perform an internal self test. During this time all the lights will 
turn on. When the lights go off the dot matrix display will show a software version (ie: VER 1.0) and the 
message window will display an odometer reading. The odometer reading displays how many hours the 
elliptical has been used and how many virtual miles the elliptical has gone. The display will look like this: 
ODO 123 MI 123 HRS.  
 
The odometer will remain displayed for only a few seconds then the console will go to the start up display. 
The dot matrix display will be scrolling through the different profiles of the programs and the message 
window will be scrolling the start up message. You may now begin to use the console.  

 

CUSTOMER SERVICE 1-888-707-1180 

 

14 

        MAURICE PINCOFFS CANADA©2007 

Содержание 16117400






































Отзывы:

Нет отзывов