Spirit 16117400 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 37

Spirit 16117400 Скачать руководство пользователя страница 11

CUSTOMER SERVICE 1-888-707-1180

10 MAURICE PINCOFFS CANADA©2007

STEP 4:Plastic Parts Assembling

1. Match Connecting Arm Covers (L) and (R), (71) and (72), on Left Connecting Arm (8)

and secure with 2pcs of M5x15mm Phillips Head Screws (82) and

ψ

3.5x12mm Self

Tapping Screw (107) by using Short Phillips Head Screw Driver (125). Repeat for the
other side.

2. Install

Sliding

Wheel

Covers (64) on each side of the Sliding Wheels (47) and secure

with 4pcs of M5x15mm Phillips Head Screws (82) by using Phillips Head Screw Driver
(126).

3. Use 2pcs of M5x15mm Phillips Head Screws (82) to secure left and right Stabilizer

Covers (60) and (61) on the stabilizer in the middle with Phillips Head Screw Driver
(126).

4. Use 2pcs of M5x15mm Phillips Head Screws (82) to secure Front Stabilizer Covers (59)

on the front stabilizer with Phillips Head Screw Driver (126).

5. Use one of M5x15mm Phillips Head Screw (82) to hold Front Console Cover (132) on

the Console Mast then match the Rear Console Cover (133) with Front Console Cover
(132) and secure both covers with two more pieces of M5x15mm Phillips Head Screws
(82) and 2pcs of

ψ

3.5x12mm Self Tapping Screws (107) by using Phillips Head Screw

Driver (126).

6. Install the Cover Holders B (156), with the hole facing backward, and secure them on the

Incline

Rail Assembly (2) with 4pcs of M6x10mm Phillips Head Screws (157) by using

Phillips Head Screw Driver (126). Use 2pcs of M5x15mm Phillips Head Screws to secure
Rear Bar Cover (73-2) on the rail base with Phillips Head Screw Driver (126).

7. Secure Rear Stabilizer Cover (73-3) on the Rear Stabilizer and the Cover Holders B (156)

with 4pcs of M5x15mm Phillips Head Screws (82) by using Phillips Head Screw Driver
(126).

8. Run the incline to position “8” and secure the Rail Bottom Cover (73) with 2pcs of

M5x15mm Phillips Head Screws (82) by using Phillips Head Screw Driver (126).

«
...
9
10
11
12
13
...
»

Содержание 16117400






































Отзывы:

Нет отзывов