Spirit 16117400 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 37

Spirit 16117400 Скачать руководство пользователя страница 7

CUSTOMER SERVICE 1-888-707-1180

6

MAURICE PINCOFFS CANADA©2007

ASSEMBLY INSTRUCTION

This manual is designed to help you easily assemble, adjust and use this machine. Please read this
manual carefully. For the sake of familiarizing yourself with the parts identified in the instruction,
first study the overview drawing.
It will take two people to assemble your unit.
Ensure all bolts are firmly tightened after each step.

■

UNPACKING THE UNIT

1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted Line. Lift

Box over the unit and unpack.

2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged

parts are found, or parts are missing, contact your dealer immediately.

3. Locate the hardware package. The hardware is separated into four steps. Remove the tools first.

Remove the hardware for each step as needed to avoid confusion. The numbers in the instructions
that are in parenthesis (#) are the item number from the assembly drawing, for reference.

STEP 1:

Incline

Rail Assembly and Console Mas

t

1. Connect

the

Incline

Rail Assembly (2) with rear stabilizer of the Main Frame (1) by using

2pcs of 3/8”x1-1/4” Hex Head Screws (77) with 2pcs of 3/8”x19x1.5T Flat Washers (96),
2pcs of 3/8”x7T Nyloc Nut (89)

and

4pcs of 5/16”x2-1/4” Hex Head Screws (167)

with

4pcs of 5/16”x20x1.5T Flat Washers (100), as shown in figure 1. Tighten with 13/14 mm
Wrench (124) and 14 mm Wrench (129).

2. Guide the Computer Cable (39) and Incline Computer Cable (36) through the Console

Mast Cover (49) and

into the Console Mast (12). Secure the Console Mast (12) with

3/8”x2-1/4” Hex Head Bolts(75), 3/8”x2T Split Washer (128), 2pcs of 3/8”x3/4” Hex
Head Bolts (76), 2pcs of 3/8”x23x2T Curved Washers (104). Tighten them with 13/14
mm Wrench (124). Slide the Console Mast Cover (49) onto the Chain Covers (50) and
(51).

3. Remove the cable tie, which ties the Computer Cable (39) and Incline Computer Cable

(36) together.

Connect the Computer Cable (39) and the Incline Computer Cable (36) on

to the back of the console (32). Connect the Handpulse Cables (44), Upper Resistance
Handle Wire (146) and the Upper Incline Handle Wire (146-1) to the back of the Console
(32). Secure the Console (32) on the console holding plate with 4pcs of M5x10m/m
Phillips Head Screws (85). Tightening them with Phillips Head Screw Driver (126).

«
...
5
6
7
8
9
...
»

Содержание 16117400






































Отзывы:

Нет отзывов