manualshive.com logo in svg

Spirit 16117400, Руководство пользователя, Страница: 27 / 37

Поделиться
Скачать
Spirit 16117400 Скачать руководство пользователя страница 27

 
Heart Rate Control Program 1 & 2 (HR 1, HR 2) operation 

 

Both programs operate the same, the only difference is that HR 1 is set to 60% and HR 2 is set to 80% of 
maximum heart rate. They both are programmed the same way.

 

(When user play HRC program, the Ramp 

will no function. ) 
To start the 

HR 1 or HR 2

 programs follow the instructions below or just press the HR 1 or HR 2  button then 

the Enter button and follow the directions in the message window. 

 
1. Press 

the 

HR 1 or HR 2 

key then press the 

Enter

 key.  

2.  The message window will ask you to enter your 

Age

. You may enter your Age, using the Up and Down 

keys or the numeric key pad, then press the Enter key to accept the new number and proceed on to the 
next screen.  

3.  You are now asked to enter your 

Weight

. You may adjust the Weight number using the Up and Down 

keys or the numeric key pad, then press enter to continue. 

4. Next 

is 

Time

. You may adjust the Time and press enter to continue. 

5.  Now you are asked to adjust the 

Heart rate Level.

 This is the heart rate level you will experience during 

the program. Adjust the level and then press enter. 

6.  Now you are finished editing the settings and can begin your workout by pressing the Start key. You can 

also go back and modify your settings by pressing the Enter key. NOTE: At any time during the editing 
of Data you can press the Stop key to go back one level, or screen. 

7.  If you want to increase or decrease the work load at any time during the program press the Up or Down 

key. This will allow you to change your target heart rate at any time during the program. 

8.  During the HR 1 or HR 2 programs you will be able to scroll through the data in the message window by 

pressing the 

Enter key.

 

9. When the program ends you may press Start to begin the same program again or Stop to exit the program 

or you can save the program you just completed as a 

custom user program

 by pressing a User key and 

following the instructions in the message window.

 

 
 
 
 
Maintenance: 

1.  Wipe down all areas in the sweat path with a damp cloth after each workout. 
2.  If a squeak, or rough feeling, develops the cause is most likely dirt build-up on the rear rails and poly-

urethane wheels. Clean the rails and wheels with a lint free cloth and rubbing alcohol. Then apply a small 
amount of lubricant on the rails with your fingers or a lint free cloth.   

3. 

If squeaks or other noises persist, check that the unit is properly leveled. There are 4 leveling pads on the 
bottom of the rear rails, use a 14mm wrench (or adjustable wrench) to adjust the levelers

. 

 
 
 
 
 
 
 
 
 
 
 

CUSTOMER SERVICE 1-888-707-1180 

 

26 

        MAURICE PINCOFFS CANADA©2007 

Содержание 16117400






































Отзывы:

Нет отзывов