SK1265-AT6
Diesel engine truck
Truck
SPIERINGS MOBILE CRANES USER MANUAL V 2.9
10-9
M
ei
2
0
1
8
Cha
n
g
e
s
a
n
d
t
y
p
o
g
ra
p
h
ic
a
l e
rr
o
rs
r
e
s
e
rv
e
d
.
©
2
0
1
8
S
p
ie
ri
n
g
s
M
o
b
ile
Cr
a
n
e
s
–
A
ll r
ig
h
ts
r
e
s
e
rv
e
d
.
10.3.3.
Refreshing coolant diesel engine truck
1. Remove the
cap A
2. The drainage plug of the coolant is situated in the centre underneath the cab (
3. Put an oil tray under the clamping connection on the pipe (see arrow);
4. Remove the clamping connection (see arrow) and let the coolant drain;
5. Mount the clamping connection if there is no coolant draining from the pipe anymore;
6. In the same way, let the coolant drain from the drainage point of the oil cooler
) at the right-hand side of the engine block;
7. Mount all opened drainage plugs, except the filler neck of the expansion tank;
8. Top up the cooling system with coolant (see
§ 10.3.2. Topping up coolant diesel engine
9. Use
cap A
to close the filler neck of the expansion tank.
CHECK / TEST!
Timely check the coolant level to prevent damage to the engine.
For more information, see § 5.3.1. Maintenance schedule diesel engine truck.
CAUTION!
Never unscrew the cap of the filler neck of the expansion tank if the engine is warm.
Hot coolant is under pressure and may be sprayed when unscrewing the cap!
CONDITIONS
The engine must be cold.
Picture 10-10
Picture 10-9