Spectur Guide for HD5 Installation
1300 802 960 | www.spectur.com.au
22
Step 4:
Using 4 M15 washers and 4 M15x30 bolts (blue), secure the frame at each corner as shown
below. Secure the two pole supports with 2 M15x25 bolts and 2 M15 nuts.
Step 5:
Using 7 tec screws for each section of the frame, secure the triangular sheets to the frame.
When attaching the sheets, alternate between overhanging sheets (blue) and the flat sheets
(red). The overhanging sheets must be on top. For additional stability, attach the stabilizers
as shown below, tighten the bolt and place one of the metal
base support plates under it. With the completion of this step,
refer to the
completing the installation section
.
Commented [GP6]:
Maybe some circled elements in photo
with notes
