manualshive.com logo in svg

Spectracom 8197, Инструкция по эксплуатации

Поделиться
Скачать
Spectracom 8197 Скачать руководство пользователя страница 11

Section 1:  General Information _____________________________________  

Page 1-2 

8197 Instruction Manual  

1.1 FEATURES 

The Spectracom Model 8197 offers the following features: 

• 

Accuracy: Continuous self calibration to GPS typically provides ±1.0 x 10

-12 

frequency accuracy.  Two-way simulcast frequency control is ±0.001Hz at 
800 MHz. 

• 

Holdover: Rubidium oscillator provides excellent holdover characteristics. 

• 

Reliable World Wide Operation: The Model 8197 can receive and track up to 
eight satellites simultaneously. 

• 

Flexibility: Several power and output options are available to suite various 
applications. 

1.2 

WARRANTY INFORMATION AND PRODUCT SUPPORT 

Warranty information is found on the leading pages of this manual.  Should it 
become necessary to exercise the warranty, contact Spectracom Corporation to 
obtain a replacement or service. 

Spectracom continuously strives to improve its products and therefore greatly 
appreciates any and all customer feedback given.  Please direct any comments 
or questions regarding application, operation, or service to Spectracom's 
Customer Service Department.  Customer Service is available Monday through 
Friday from 8:30 A. M. to 5:00 P. M. Eastern time at 

585-321-5800

. 

In addition, please contact customer service to obtain a Return Material 
Authorization Number (RMA#) before returning any instrument to Spectracom 
Corporation.  Please provide the serial number and failure symptoms. 
Transportation to the factory is to be prepaid by the customer. 

Product support is also available by e-mail.  Questions on equipment operation 
and applications may be e-mailed to Spectracom Sales Support at: 

[email protected]. 

Repair or technical questions may be e-mailed to Spectracom Technicians at: 

[email protected]. 

Visit our web page for product information and upgrade notices as they become 
available at: 

http://www.spectracomcorp.com 

 

Содержание 8197


















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды