Spectra Watermakers Farallon 1800, Инструкция по установке и эксплуатации

Страница: 8 / 53

8
The Charcoal Filter Housing may be located in any convenient
location near the Spectra-Pearson Pump Module. It should be
mounted with the filter housing vertical and accessible for
changing filters. Allow 2” below the filter housing for removal. Do
not install over electrical equipment. The unit contains a charcoal
filter for the flush water, shut-off valve, and flush water pressure
regulator.
Spectra-Pearson Pump and
Control Module
Charcoal Filter Housing
Mount the Spectra-Pearson Pump and
Control Module on a horizontal
surface no more than 3’ (1.0M) above
the waterline. It is preferable to mount
it as low as possible. Locate in an area
that allows the lid to be easily lifted
and is accessible for service and oil
changes. Keep future maintenance in mind when choosing a location. The membranes
can be damaged at ambient temperatures over 120F (48C). The Control Box can be
remotely mounted if space is limited. Call the factory if an extended control cable is
Pre-filters
The Pre-filters are located between the boost pump and
the High Pressure Module. They house the 20 and 5
micron filters. They should be mounted vertically so
that water doesn’t pour out of the filter bowls during
filter changes. Allow 2” below the filter housings for
removal. Do not install over electrical equipment.
Brine Discharge Service Module
The brine discharge service module is mounted between the brine
discharge outlet on the Spectra-Pearson Pump Module plumbing
manifold and the brine discharge thru-hull fitting. It can be mounted
in any orientation. Be sure that once installed you will have access
to the yellow valve handle on top and the garden hose fitting on the
side.