GB
20
2.3.7 INSTALLATION OF THE WATER-BEARING
COMPONENTS OF THE SENSO M H
2
O / PIKO H
2
O
Assembly of the water-bearing components, the necessary safety devices,
temperature sensors and similar components must always be carried out by
a specialised company. The Mellino H
2
O / Piko H
2
O must be installed with all
water-bearing components accessible and inspectable at all times!
The stove as well as all associated immersion sleeves, connectors, moulded
components and pipes must be have the pressure checked prior to commis-
sioning and checked for airtightness.
2.3.7.1 CONNECTIONS OF SENSO M H
2
O / PIKO H
2
O
The connections on the Senso M H
2
O are located on the back and can be
guided from the inside downwards using the flexible attachment kit. The Piko
H
2
O has its connections on the bottom which can be routed to the back and
the side with the flexible attachment kit.
The connections have transport caps and brass stops for transport purposes.
This must be removed prior to installation. The connections are clearly labelled
and must not be used other than for the specified purpose! In particular, the
integrated safety device (safety heat exchanger) must not be used to heat
water.
For easy installation of the pipes, etc. when during connection through
the floor, there is an installation template that can be downloaded on our
website www.spartherm.com in dealer login.
The installation tem-
plate is valid only in conjunction with the flex attachment kit.
Alternatively, an installation template in the scale of 1: 1 can be requested in
print format from us. The flex attachment kit can be ordered for easy and quick
connection of pipes in the floor and the internal connections.
A =
remove
B =
Insert front stones
C =
insert inner stone
D =
insert cover stone (with
handle)
E =
fit
Cubo M / Piko M:
E
