![background image](http://html.mh-extra.com/html/sparkrite/sr100/sr100_user-manual_1339849004.webp)
SR100 REMOTE CONTROL CAR ALARM SYSTEM
4
OPERATING YOUR SPARKRITE SR100 ALARM SYSTEM
The radio remote control transmitter conforms to DTI legislation with each unit
allocated a unique security code. Additional remote controls are available on special
order from Halfords or direct from Sparkrite using the enclosed order form, quoting
the serial number on the back of the remote control.
ARMING YOUR ALARM
To arm the SR100 alarm system proceed as follows:
•
Remove the ignition key and leave the vehicle, making sure all doors,
windows, sunroof, boot and bonnet are closed.
•
Press the button on the remote control firmly once. The indicators on the
vehicle will flash once and the alarm siren will chirp once. The dash mounted
LED will illuminate to confirm the alarm has been armed.
•
After a 20 seconds delay the LED will start to flash, confirming that the alarm
is now fully armed.
DOOR OPEN ALERT
NOTE:
If the siren chirps four times when attempting to arm the alarm, this
indicates that a door, the bonnet or the boot (if connected) has been
left open.
All doors, boot and bonnet must be fully closed before
attempting to rearm the alarm. When the alarm is armed, the current
sensing and shock sensing circuits will not trigger the alarm until a 20
seconds exit delay has expired.
This is to allow movement of the
vehicle and in some cases interior light delays to cease.
DISARMING YOUR ALARM
To Disarm the Alarm:
•
Press the remote control transmitter button once, the indicators will flash twice
and the siren will chirp twice.
•
If you trigger the alarm accidentally, follow the normal disarming procedure
keep the remote control button depressed until the alarm stops.
ENTRY ALERT
If when disarming the alarm the siren gives 3 chirps and 3 flashes of the indicators
this indicates that the alarm has been triggered in your absence.
You should
carefully check your vehicle before attempting to drive away.