background image

 36.00 

 52.79 

 46.81 

 49.44 

15.10 

STS Recommends to Secure Storage

Tank to Wall (Bolts not Included)

2

1

3

General Notes:

1) All Connections are 1/4" NPT unless otherwise specified.

2) Tank should be set on a hard stable surface.

ITEM # STS PART #

DESCRIPTION

QTY.

1

800-111-L

100# Tank with Label and Packaging

1

2

A01-0100-S

Tank Manifold,  Tube  Port

1

3

A01-0100-A Tank Strap Assembly

1

A

B

C

D

SCALE:

DATE:

APPROVED BY:

REVISION:

DD-A01-BB-01

0

05/29/2015

PJS

1:7

DRAWN BY:

CHECKED BY:

22.9 Gallons

VOLUME:

MATERIAL:

WEIGHT:

70 lbs

1 of 1

B

NUMBER:

SIZE:

SHEET:

DATE:

DATE:

PROJECT NAME;

South-Tek Systems

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS DRAWING IS 

THE SOLE PROPERTY OF SOUTH-TEK SYSTEMS.  

ANY REPRODUCTION IN PART OR AS A WHOLE 

WITHOUT THE WRITTEN PERMISSION OF SOUTH-

TEK SYSTEMS IS PROHIBITED.

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES:

A

B

C

D

1

2

3

4

5

6

7

8

2

3

4

5

6

7

8

1

100# Tank with Manifold and Strap Assembly 

Design Data

Whole Number Dim's:  1

One Place Decimal:  .2

Two Place Decimals:  .02

Three Place Decimals:   .005

Angular:  .05

JN

5/29/15

Содержание BEERBLAST 14KPH














































Отзывы: